Red Stick Concrete Coatings

Baton Rouge · Gonzales · Denham Springs · Zachary & the Capital Region

Epoxy Flooring & Garage Floor Coatings in Baton Rouge

Concrete floors built to outlast Louisiana weather. Epoxy and polyaspartic coating systems for garages, businesses, patios, and shops across the Baton Rouge metro — generally $5 to $12 per square foot installed, with prep specified for slab-on-grade concrete and Gulf South humidity.

Free quotes · Straight answers on price, cure times, and coverage

Get Your Free Quote

By submitting, you agree that Red Stick Concrete Coatings or an independent local installer may contact you about your project by phone or email. See our Privacy Policy.

Concrete Coating Services in Baton Rouge

Five systems, matched to the floor and how you actually use it — from a single-car garage to a commercial kitchen.

If the floor in question is a residential garage, start with garage floor coating in Baton Rouge: the full process, timeline, and price ranges are on that page.

If getting back into the garage quickly matters most, a polyaspartic floor coating takes vehicles back in roughly 24 to 48 hours. For a restaurant or food-service floor, start with commercial kitchen floor coating in Baton Rouge.

Garage Floor Epoxy and Coatings in Baton Rouge

Garage floor epoxy, an epoxy garage floor, a garage floor coating: people use all three names for the same family of systems, and what separates them is the build and the topcoat. A solid-color epoxy floor is the simplest system, at about $5 to $7 per square foot installed. A flake epoxy floor broadcasts color chips into the base coat, which hides imperfections and adds slip resistance, at $6 to $9. A polyaspartic or hybrid build, usually an epoxy base with a polyaspartic topcoat, runs $7 to $12 and holds its color where sunlight reaches the slab, with vehicles back in roughly 24 to 48 hours instead of three to seven days for straight epoxy.

Every one of them depends on the same prep: diamond grinding, crack repair, and a moisture test on slab-on-grade concrete. Compare the garage floor epoxy options side by side, and see what an epoxy garage floor costs in Baton Rouge by garage size. When an independent local installer takes your project, you talk to them directly and get a written quote.

What Floor Coatings Cost in Baton Rouge

Most residential work is priced per square foot, installed. The system sets the baseline, and the condition of your slab moves you within the range:

SystemInstalled
Solid-color epoxy$5–$7 / sq ft
Epoxy with decorative flake$6–$9 / sq ft
Polyaspartic / hybrid system$7–$12 / sq ft
Metallic or custom decorative$9–$15+ / sq ft
Single-car garage (roughly 250–300 sq ft)$1,500–$3,000
Two-car garage (roughly 400–500 sq ft)$2,500–$5,500
Three-car or oversized garage (600+ sq ft)$5,000–$8,500
Patio, porch, or walkway$1,200–$4,000 depending on square footage and finish

Planning ranges only — a real number comes from looking at your concrete. For the full breakdown of what moves the price, how to compare quotes fairly, and where DIY kits actually cost you money, read our Baton Rouge epoxy flooring cost guide.

How the Work Actually Goes

Every stage below is labor you are paying for. Knowing the sequence makes any quote you are handed much easier to read.

  1. 1. Slab assessment

    A real quote starts with someone looking at the slab itself — cracks, spalling, prior coatings, stains, and how moisture behaves in the floor. That assessment is what the number is built on.

  2. 2. Mechanical preparation

    Diamond grinding or shot blasting opens the concrete so the coating has a profile to bond to. This is the step cheap quotes skip, and the reason cheap floors peel.

  3. 3. Repair and priming

    Cracks and spalls get filled, and if moisture readings call for it, a moisture-tolerant primer goes down before anything else.

  4. 4. Base coat and finish

    The base coat is applied and, for flake systems, the flake is broadcast into it wet. Excess is scraped and vacuumed once cured.

  5. 5. Topcoat and return to service

    A clear topcoat seals the system. Foot traffic and vehicle traffic have separate wait times, and you should get both windows in writing before work starts.

Built for Gulf South Concrete

Humidity and moisture first

Most Baton Rouge homes sit on slab-on-grade foundations, so ground moisture can drive vapor up through the concrete. A coating over a slab with elevated moisture can blister or delaminate months later. Testing belongs before product selection, not after.

Systems, not paint

A big-box kit is often a thin single coat. A professional system is multiple coats with measurable mil build, which is what prevents hot-tire pickup — the failure where a hot tire softens a thin coating and lifts it when you pull out.

Straight answers on price

Honest square-foot ranges, real cure times, and a written scope covering prep, repair, system, and finish. If a number moves, you should hear why before the work starts.

Built for storm season

Coated concrete can be hosed out and dried rather than torn out. In a region that plans around hurricane season, a sealed floor is a practical decision, not a cosmetic one.

More on the local conditions that decide whether a coating lasts: how Louisiana humidity affects concrete floors and epoxy vs. polyaspartic for Louisiana garages.

Serving the Baton Rouge Metro

Concrete is not the same everywhere in this region. Newer subdivisions south of the city, mid-century slabs to the north, and flood-repaired floors east of Baton Rouge all call for different preparation — so each area has its own page.

Garage floor epoxy and coating requests are covered across Baton Rouge, Prairieville, Gonzales, Denham Springs, Zachary, Central, Baker, Walker, Port Allen, Addis, Brusly, and St. Gabriel.

Don't see your town? If you are within an hour of Baton Rouge, call — we probably cover you.

Frequently Asked Questions

How much does epoxy flooring cost in Baton Rouge?

Professionally installed epoxy and polyaspartic coatings in the Baton Rouge area generally run $5 to $12 per square foot. That puts a typical two-car garage at roughly $2,500 to $5,500, and a single-car garage at about $1,500 to $3,000. Slab condition and the coating system you choose are what move the number most. Single-, two-, and three-car numbers by system are in the full Baton Rouge cost breakdown by garage size.

How long does a garage floor coating take?

Most residential garages are a one- to two-day install: preparation and repair on the first day, base coat and topcoat as the schedule allows. The bigger variable is return to service — foot traffic and vehicle traffic each have their own wait, and polyaspartic topcoats generally get you back in sooner than straight epoxy.

Do you serve areas outside Baton Rouge?

Yes. We cover the Baton Rouge metro, including Prairieville, Gonzales, Denham Springs, Zachary, Central, Baker, Walker, Port Allen, Addis & Brusly, St. Gabriel. If you are within about an hour of Baton Rouge, call and we will tell you straight whether we cover you.

Can a floor with a failing coating be recoated?

Usually, but the old coating has to come off first. Coating over a delaminating floor or a thin DIY kit just transfers the failure to the new surface. Mechanical removal is its own line item on the quote, and it is worth paying for rather than covering up.

What is the difference between epoxy and polyaspartic?

Epoxy is the proven, cost-effective base. Polyaspartic cures faster, returns to service sooner, and resists the UV yellowing that can amber an epoxy topcoat over time — but it costs more per gallon and demands a more experienced crew because the working window is short. Many Baton Rouge installs pair an epoxy base with a polyaspartic topcoat to get both.

Who installs garage floor epoxy in Baton Rouge?

Red Stick Concrete Coatings is a referral service, not a contractor: we answer the phone, talk through the options and cost ranges, and take quote requests. When an independent local installer takes your project, you talk to them directly. Ask them for proof of insurance and for a written quote that lists prep, repair, the coating system, and the finish as separate lines. The questions to ask a garage floor epoxy installer cover what a good answer sounds like.

More questions answered on our concrete coatings FAQ.

Get Your Free Quote

Tell us about the floor and the finish you have in mind. Calling is still the fastest way to get a real answer.

By submitting, you agree that Red Stick Concrete Coatings or an independent local installer may contact you about your project by phone or email. See our Privacy Policy.

Prefer to talk? (225) 457-3961

Call NowFree Quote